Search results for "Tool material"
showing 4 items of 4 documents
Finite element modelling of temperature distribution in the cutting zone in turning processes with differently coated tools
2005
Abstract The aim of this study is to check the applicability of various simulation models to obtain finite element solutions of cutting forces, specific cutting energy and adequate temperatures for a range of coated tool materials and defined cutting conditions. Commercial explicit finite element code Thirdwave AdvantEdge has been used in simulations of orthogonal cutting processes performed by means of uncoated carbide and coated tools. The latter were equipped with progressively increasing number of thin layers including TiC, TiN and Al 2 O 3 films deposited onto ISO P20 carbide substrates. Results showing the tool–chip interfacial friction influencing the temperature distribution fields,…
Tool Wear and Damage
2008
This chapter provides comprehensive knowledge regarding tool wear mechanisms and characterizes their physical fundamentals. Adhesion, abrasion, diffusion and oxidation are selected as predominant mechanisms controlling tool wear, depending on the mechanical and thermal conditions at the rake and flank faces. The analytical models describing the wear rate and volumetric material loss for different wear mechanisms are provided. The tool wear indicators related to crater, flank and notch wear specified in ISO 3685 are presented for both flat-faced and grooved tools. Tool life is defined and corresponding models, including the influence of cutting speed, feed and the depth of cut, are derived. …
Metal Matrix Composites - Mmc - Turning: Comparison of Tool Materials
2002
The main properties required to the modem cutting tools to be employed in production, are both high wear resistance and chemical stability. In this last years, in the machining of MMCs several kinds of coated tools have been developed; they are characterized by high hardness to resist to the relevant strength and abrasive action of the reinforce fibers or particles, arranged inside the matrix. In turning of MMC the employ of Tungsten Carbide tools coated with Polycrystalline Diamond (PCD) have shown to be very effective, whereas they are very expensive thus increasing the production costs.
Interdependence Between Tool Fracture and Wear
1985
Wear and fracture are the main causes of tool scrapping. However fracture plays a major role for increasing values of the hardness and brittleness of tool materials or when low-cobalt tungsten carbides are used or in interrupted cutting conditions where it is the most relevant factor for tool scrapping. In order to obtain the optimal values of the cutting speed both these factors should be considered. The hypothesis of stochastic independence among them simplifies the mathematical formulation of the optimization problem; but experimental investigations do not agree with this assumption and, as a matter of fact, the probability density function of tool fracture results to be dependent on the…